____________________ are steel rollers in a cage that keep a shaft centered
Fill in the blank(s) with the appropriate word(s).
ANS: Needle bearings
You might also like to view...
A multifamily dwelling has 7 living units —two with 10-kW electric ranges, three with 6-kW electric ranges, and two with 16-kW electric ranges. Determine the average rating range for the 7 living units.
What will be an ideal response?
In a communicating system, control signals and information are exchanged:
A) Only when permission is granted by the operator. B) In one direction: from all the system components back to the communicating control. C) In both directions between the components and the communicating control. D) In one direction: from the master controller to all the components.
An acceptable charging circuit voltage on a 12 volt system is __________
A) 12 to 14 volts B) 13.5 to 15 volts C) 12.6 to 15.6 volts D) 14.9 to 16.1 volts
Which of the following can you perform using the move grip tool?
a. Move the objects constrained to one of the three planes of the current UCS b. Move objects along one of the three axes of the current UCS c. Move an object to any point in the 3D space d. All of the above