?The root pass welds must start and end on the ______________.
Fill in the blank(s) with the appropriate word(s).
tack welds
Trades & Technology
You might also like to view...
The voltage difference between TCM ground and battery ground should be less than ________ volts.
A) 0.2 B) 2.0 C) 12.6 D) 13.6
Trades & Technology
Determine the reactions in the rigid frame in Figure P9.47. In addition to the applied load, the temperature of beam BC increases by 60°F. Given: IBC = 3600 in. 4 , I AB = I CD = 1440 in. 4 , ? = 6.5 × 10 ?6 (in./in.)/°F, and E = 30,000 kips/in. 2 .
Trades & Technology
What is the proper tool used to measure valve clearances?
A) Micrometer B) Vernier caliper C) Feeler gauge D) Dial gauge
Trades & Technology
The fine for venting refrigerant into the atmosphere can be as high as ____________________ per day.
Fill in the blank(s) with the appropriate word(s).
Trades & Technology