The difference between codes and standards is:
A) Codes and standards apply to equipment that is sold on international markets.
B) Codes are enforceable by law, and standards are not.
C) Codes apply to local municipal laws, and standards apply to state laws.
D) Codes apply only to city and county building regulations.
B
You might also like to view...
Why is it usual practice to plot 1-to-1 in paper space?
What will be an ideal response?
?Why does the return water on a water-cooled GTAW torch flow out around the power cable?
A. ?The electricity in the cable has to be protected from emitting RF from the high frequency starting voltage. B. ?To reduce the number of hoses to the torch. C. ?So a smaller power cable can be used. D. ?It helps to heat the water a little more to prevent algae and mold from growing.
With respect to the calculations of current as compared to the previous editions of the Code, it is permitted to round fractions down to the next lower whole ampere if less than ___________________ ampere(s).
Fill in the blank(s) with the appropriate word(s).
Processor elements consists of all of the following except ________
A) the memory management unit B) the condition code register C) the instruction decode register D) the program counter