____________________ is the inside diameter of the engine’s cylinder.
Fill in the blank(s) with the appropriate word(s).
Cylinder bore
You might also like to view...
When using a laser level, the laser transmitter is level with the end receiver when the display window shows a _____.
a. vertical line b. plus sign c. zero d. horizontal line
Identify three cultural practices in caring for plants that help prevent disease
What will be an ideal response?
Technician A says that all injectors in a sequential fuel injection system often use the same power wire. Technician B says that each injector in a sequential fuel injection system should have a different ground wire. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Answer the following statement(s) true (T) or false (F)
1. the noise from a defective rear drive pinion bearing may produce a high pitched whistling or whining sound that changes with driving mode (on or off the gas pedal) 2. In a differential with a gear ratio of 4:1, the drive pinion would revolve four times to cause the ring gear to rotate once. 3. the positive traction differential is designed to resist the tendency of one drive wheel to rotate without the other. 4. a non-hunting ring and pinion gear will have the same teeth on the pinion touch the same teeth on the ring gear each revolution. 5. Backlash is the amount of movement between the tooth contact of two gears in mesh.