Use the following engine dimensions to calculate the compression ratio
Bore: 3.920 in. Stroke: 3.300 in. Gasket thickness: 0.050 in.
Deck height: 0.010 in. Piston dish volume: 7.8 cc Combustion chamber volume: 59.0 cc
A) 9.3:1 B) 9.4:1 C) 9.1:1 D) 9.2:1
A
You might also like to view...
Which category of appliances are positive vent static pressure with a vent gas temperature that can cause excessive condensate production in the vent?
a. Category I b. Category II c. Category III d. Category IV
This method of casting injects molten nonferrous metal into a steel or iron die under high pressure, where castings are produced quickly and economically.
a. centrifugal casting b. die casting c. permanent casting d. sand casting
Which of these statements concerning the SAE flare fittings used on hydraulic brake systems is TRUE?
A) Have a 45-degree taper on the male part of the fitting B) Have a 20-degree taper on the male and female parts of the fitting C) Have no taper on the female part of the fitting D) Must be single flared
In a truck front suspension in which the spring is fixed at one end by pin, which of the following components permits variations in spring length as the spring flexes?
A. mainspring eye B. rebound clips C. U-bolts D. spring shackles