____________________ pliers have grooves cut into the jaws to provide positive gripping when removing or installing wire hose clamps.
Fill in the blank(s) with the appropriate word(s).
Hose clamp
You might also like to view...
One of two machines, alpha and beta, is to be purchased to provide for a new production operation in a factory. Machine alpha costs $10 000 and machine beta, $15 000. However, machine beta will result in an annual savings in operating costs of $800 over machine alpha. Which machine would you recommend purchasing and why, if each has a useful life of 10 years and money is worth 6 percent? Assume that both machines will be worthless at the end of 10 years. What value of annual savings of machine beta over machine alpha would result in each being equally desirable?
What will be an ideal response?
Neither the compass saw nor the coping saw are used for cutting curves
Indicate whether the statement is true or false
A three-phase, 60 Hz, Y-connected, 480 V induction motor rotates at 3500 rpm at full load. The motor is driven by a slip energy-recovery system. Calculate the triggering angle for a motor speed of 2800 rpm. Assume the turns ratio is equal to 1.
What will be an ideal response?
A P0102 DTC is being discussed. Technician A says that a sensor circuit shorted-to-ground can be the cause. Technician B says that an open sensor voltage supply circuit could be the cause. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician