When using a chain fall to lift or lower weldment parts, always secure the chain fall to an overhead structural
member with an approved _____.
a. chain collector
b. come-along
c. lifting eye
d. sling
d
You might also like to view...
A(n) ____________________ diagram shows each of the subassemblies as a major "stem" from the "backbone" with all of the individual parts within a subassembly shown as branches from the corresponding stem.
Fill in the blank(s) with the appropriate word(s).
A piece is to be cut to the dimensions and tolerances shown in the accompanying figure. Determine the maximum permissible value of length A. All dimensions are in inches.
What will be an ideal response?
The following statements are all correct EXCEPT _________
A) Used tires produce a heavy smoke when burned. B) Used tires are difficult to dispose of in a landfill because they tend to rise to the surface. C) Used tires can be breeding grounds for mosquitoes that carry disease. D) All of the statements are correct
MSB stands for
A) Most Significant Bit. B) Minimum Single Bit. C) Maximum Single Bit. D) Middle Sum Byte.