Technician A says brake fluid should be filled to the top of the reservoir to be assured of proper brake pressure when the brakes are applied. Technician B says that the brake fluid level should be filled only to the maximum level line to allow for expansion when the brake fluid gets hot during normal operation. Which technician is correct?
A) Technician A only B) Technician B only
C) Both Technicians A and B D) Neither Technician A nor B
B
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. When conductors supply two or more motors, the Code® specifies that the feeder shall have a current capacity of not less than 125 percent of the full-load current rating of the highest rated motor in the group. 2. The Code® specifies that the overcurrent protection for a feeder which supplies motors is determined by taking the current rating of the branch motor circuit with the smallest fuse rating, plus the sum of the full-load currents to the other motors. 3. The service-entrance switch must be connected on the supply side of the meter. 4. The electrician is responsible for installing the meter test cabinet and connecting the supply wires and load wires at the test block.
The block deck is the ________
A) Valley surface of a V-type engine B) Engine mounts are attached to the block C) Top surface of the block D) Bottom (pan rail) of the block
Which of the following statements is most accurate?
A) Perimeter systems accommodate many of the loads of the core system and loads caused by weather. B) Core systems are subject to a wider range of variables than perimeter systems. C) Core systems must adjust to accommodate variables such as wind effects. D) Perimeter systems only need to accommodate loads such as electrical equipment and lighting.
The rich soil and climate made the New World an ideal place for agriculture
Indicate whether the statement is true or false.