This machine can be used to cut material to length or for cutting a narrow slot called a kerf.
a. saw machine
b. grinding machine
c. lathe
d. milling machine
a. saw machine
You might also like to view...
For a three-phase system, the maximum voltage imbalance allowed is _____.
a. 2% b. 5% c. 10% d. 20
Single-phase motors require ____ windings to operate.
a. main b. auxiliary c. terminal d. three-phase
If a cut is to be started in a place other than the edge of the plate, ____.
A. the inner cones should be held as close as possible to the metal B. the inner cones should be as far as possible from the metal C. hold the torch at a right angle and pointing slightly away from the plate D. hold the torch at a 45 degree angle, pointing slightly toward the plate
If the solid-state electronic voltage regulator is not in or on the alternator, where would it be located?
What will be an ideal response?