Before a steel plate is used for practice welding, mill scale on the plate is removed because the DCEN used in

GTAW has little or no _____.

a. electrical conductance
b. flux resistance
c. arcing ability
d. cleaning action


d

Trades & Technology

You might also like to view...

Explain what happens when standoff distance increases.

What will be an ideal response?

Trades & Technology

Nitrogen enters a steady-state process at T = 150 K and P = 0.1 MPa. A compressor increases the pressure to 0.4 MPa, and is followed by a heat exchanger. A second compressor increases the pressure to 2 MPa and feeds into a second heat exchanger. Each heat exchanger lowers the temperature isobarically to 150 K. If each compressor is adiabatic and has an efficiency of 80 %, determine the TOTAL work added per kilogram of nitrogen and the TOTAL heat removed per kilogram of nitrogen. Use Figure 2-3 for data.

A. +192 kJ/kg; -210 kJ/kg B. +298 kJ/kg; -4556 kJ/kg C. +154 kJ/kg; -172 kJ/kg D. +192 kJ/kg; -172 kJ/kg E. Insufficient information to solve

Trades & Technology

The VECI label includes all of these EXCEPT _________

A) Engine identification B) Valve lash C) Spark plug type and gap D) Horsepower and torque rating of the engine

Trades & Technology

What input signal of the 74192/74193 up/down counter can clear the counter to 0?

A) Cpu B) PL C) TCd D) MR

Trades & Technology