Conduit systems in volatile envirnoments must be _____.

a. sealed
b. bent
c. left uncovered
d. galvanized


a. sealed

Trades & Technology

You might also like to view...

Large diameter plastic pipe is used mostly for

a. household water systems c. vent systems b. field drainage d. sewage systems

Trades & Technology

Differentiate between prokaryotic and eukaryotic cells

What will be an ideal response?

Trades & Technology

A vehicle is being checked for a no-crank condition. A voltmeter placed across the contacts of the starter solenoid indicates 12 volts when the ignition is turned to the "start" position. A distinct "click" noise is heard coming from the solenoid at the same time. Technician A says the starter motor may have an open armature or field current. Technician B says the starter solenoid needs to be replaced. Who is correct?

A. Technician A only B. Technician B only C. Both Technician A and B D. Neither Technician A nor B

Trades & Technology

Two technicians are discussing testing MAP sensors. Technician A says that the MAP sensor voltage on a General Motors vehicle at idle should be about 1 volt. Technician B says that the MAP sensor frequency on a Ford vehicle at idle should be about 105—108 Hz. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians D) Neither technician

Trades & Technology