The generic name always _____
A) appears last
B) begins with a capital letter
C) is written in small letters
D) is enclosed in quotes
B
You might also like to view...
In certain cases, the function of a part may require using a profile of a surface tolerance to control the size, location, orientation, and form of a closed polygon. In this application, a(n) ____________________ profile is established by the basic dimension.
Fill in the blank(s) with the appropriate word(s).
Answer the following statement(s) true (T) or false (F)
1. The primary winding of a current transformer must be connected in parallel with the load. 2. When a small amount of AC current must be measured, a CT is connected in the power line. 3. When current transformers are used, the main power line is inserted through the opening in the transformer. 4. To use the clamp-on type of AC ammeter, the jaw of the meter is clamped around all of the conductors supplying power to the load. 5. The ability to change the turns ratio of a clamp-on ammeter can be very useful for measuring low currents.
Commercial nitrogen fertilizers are made through the ____________________ process
Fill in the blank(s) with correct word
To lower and narrow a valve seat that has been cut at a 45-degree angle, use a cutter or stone of what angle?
A) 45 degrees B) 15 degrees C) 60 degrees D) 30 degrees