Assuming that the location of the destination node 23 is known to be located in the northeast direction, what changes do you need to make in determining a route in P13.7? Explain clearly.
If the node 23 is known to be located in the north-east direction, route request
flood scope would be limited. For example, when node 6 floods its packet, it
would send packet to nodes 4 and 8, need not send packet to nodes 5 and 7 as
node 23 is in the north-east direction.
You might also like to view...
With a ____, all of the common attributes and desirable features of each concept are list in the first column. A numerical factor for each feature/attribute is then established (e.g., using a scale of 0 to 10).
A. concept map B. concept sketch C. brainstorming web D. weighted decision table
Framing squares are used for squaring boards and timbers, laying out rafters, determining if the end of the board is square and squaring a board for sawing
Indicate whether the statement is true or false
The frame in Figure P13.8 is to be constructed with a deep girder to limit deflections. However, to satisfy architectural requirements, the depth of the columns will be as small as possible. Assuming that the moments at the ends of the girder are 25 percent of the fixed- ended moments, compute the reactions and draw the moment curve for the girder. The column bases cannot resist moment.
In order to perform refrigerant maintenance on the low side of the refrigeration system you will need to perform a low side pump down. With the unit running in high speed cool:
A. Front seat the receiver tank outlet valve B. Front seat the suction service valve C. Front seat the discharge service valve D. Front seat the bypass check valve