Flat rate pay means _______
A) The technician is paid according to the job, not the number of hours worked
B) The same pay (flat rate) every week
C) The technician is paid overtime
D) The same number of hours every week
A
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. In the reversing starter, both mechanical and electrical interlocks are used to prevent both starters from closing their line contacts at the same time. 2. A DC motor will generally require more maintenance than an AC motor. 3. The difference between synchronous speed and actual rotor or motor speed is referred to as slip and is normally expressed as a percent of synchronous speed. 4. A servo drive is the least complex type of variable frequency drive system available. 5. The decision makers are used to perform the work that must occur as the machine sequences through its operations.
A newly married couple wants to remodel their home. They have come up with the following budget for each of the six rooms:Bedroom#1: $800Bedroom#2: $700Kitchen: $2,500Dining room: $1,100Bathroom: $1,600Living room: $1,900Using the information above, determine the number of degrees in the angle that represents the portion of the budget allocated to the dining room in a circle graph. Round the answer to the nearest tenth degree.
Fill in the blank(s) with the appropriate word(s).
When installing a piping system with iron pipe:
A) The pipe must be fitted with a vise. B) The pipe must be cut with a vise. C) The pipe must be threaded and fitted. D) The pipe must be cut and fitted.
Technician A says that the cruise control on a vehicle equipped with an electronic throttle control (ETC) system uses a servo to move the throttle. Technician B says that the cruise control on a vehicle with ETC uses the APP (Accelerator Pedal Position) sensor to set the speed. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician