It is desirable for the sensor to produce a certain amount of ____________________ instead of a certain amount of voltage because it eliminates the problem of voltage drop on lines.
Fill in the blank(s) with the appropriate word(s).
current
You might also like to view...
Which of the following is not a common duty of a process technician?
A) Controlling equipment B) Monitoring equipment C) Troubleshooting equipment D) All of the above
Brazing is done at ____ soldering.
A. the same temperature as B. lower temperatures than C. higher temperatures than D. temperatures that can be higher or lower than
Carry the answer to two decimal places. The voltage at the terminals A and B in the diagram of the electric generator shown is 219.7 volts, and the voltage drop (loss in the line) is 3.96 volts. What is the voltage at the end of the line at points C and D?
Fill in the blank(s) with the appropriate word(s).
What is the problem associated with discharging a gauge manifold through its middle leg?
A) There is the use of extra power to the unit. B) There is a loss of refrigerant. C) There is a need to replace the hose. D) There is wearing on the valves.