Before pulling a piston from a cylinder bore, which of the following is recommended?
A. remove the crankshaft
B. pull piston through the bottom of the liner
C. clean up the liner carbon ridge
D. remove the main bearing cap
Answer: C
You might also like to view...
Lightning arresters are designed to provide a(n) ____ path to ground for any surge currents such as those resulting from a lightning strike.
A. high impedance B. low-impedance C. indirect D. intermittent
Technician A says that drum brakes can fail to slow the vehicle if driven through deep water. Technician B says that when drum brakes get hot, the brake pedal will drop because the drum expands away from the shoes. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
A customer states her MIL is blinking. Technician A says that this condition may damage the catalytic converter if the customer continues driving. Technician B says that freeze frame data should be stored. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
The direct-spark ignition system ________
A) provides a spark to the thermocouple B) provides a spark to start the pilot flame C) provides a spark to start the main flame