Answer the following statement(s) true (T) or false (F)
1. A straightness tolerance is a geometric tolerance that defines the straightness deviation permitted on individual surface elements or on a derived median line.
2. Wherever Rule #1 applies to a cylindrical feature of size, it invokes an indirect straightness deviation requirement on the surface elements.
3. Although Rule #1 provides an indirect straightness tolerance, a straightness tolerance should be specified on surface elements, unless it is a refinement of the dimensional limits of the size dimension (i.e., size tolerance).
4. Wherever Rule #1 applies to a cylindrical regular feature of size, an indirect straightness deviation requirement exists for the derived median line of the feature of size.
5. Where a straightness tolerance is applied to a surface element that is associated with a size dimension, and Rule #1 does not apply to the size dimension (i.e., overridden, independency, stock size, etc.), the straightness tolerance value may be smaller than the size tolerance.
1. T
2. T
3. F
4. T
5. F
You might also like to view...
During embryo transfer, donor animals undergo a process known as ______________, which causes the donor animal to release several eggs instead of just one
Fill in the blank(s) with correct word
A 40 VA transformer is used on a control circuit to provide 24 volts to the relay and contactor coils of the system. The voltage across the secondary winding of the transformer is only 18 volts. What is most likely the problem?
What will be an ideal response?
Carry the answer to three decimal places.'The dry cells shown add up to a total voltage of 27.5 volts. What is the average number of volts for each dry cell?
Fill in the blank(s) with the appropriate word(s).
What is SEMA?
What will be an ideal response?