The process of commissioning of a building occurs
A) during postconstruction phase.
B) during construction document phase.
C) before or during schematic design phase.
D) during design development phase.
E) during construction phase.
A) during postconstruction phase.
You might also like to view...
Which of these can be used to measure the frequency (Hz) output of the sensor and compare the reading with specifications?
A) Logic Probe B) DMM (digital multimeter) C) High impedance test light D) Megohmmeter
An alternating current of 60 hertz changes direction 100 times per second.
Answer the following statement true (T) or false (F)
A parallel plate capacitance transducer uses plates of area 500 mm which are separated by a distance of 0.2mm.
(i) Calculate the value of capacitance when the dielectric is air having a permittivity of 
.
(ii) A linear displacement reduces the gap length to 0.18mm. Calculate the change in capacitance.
(iii) Calculate the ratio of per unit change of capacitance to per unit change in displacement.
(iv) Suppose a sheet of mica 0.01mm thick is inserted in the gap. Calculate the value of original capacitance and change in capacitance for the same displacement. The dielectric constant of mica is 8 [C = A/d].
What will be an ideal response?
The PCI-Express bus differs from the PCI-X bus in that ________
A) the PCI-Express bus is backward compatible with the PCI bus B) PCIe devices do not connect directly to the host device C) the PCI -X bus tansfers data over lanes D) All of the above