In which part of a computer system are the instructions stored?
A) memory (ROM or RAM) B) central processor
C) input/output D) all of the above
A
You might also like to view...
The heat input to the diesel cycle is nearest:
The pressure and temperature at the inlet to an ideal diesel cycle, with P-v diagram shown, are 100 kPa and 10ºC. It has a compression ratio of 18 and a cut-off ratio of 2. The maximum temperature in the cycle is 1400ºC. Assume constant
specific heats from Table below for all calculations.
A) 775 kJ/kg
B) 800 kJ/kg
C) 825 kJ/kg
D) 850 kJ/kg
Technician A says that the tire pressure can be 5 PSI below specification but not turn on the TPMS warning lamp. Technician B says that vehicles with TPMS do not need to have the tire pressure checked monthly. Who is correct?
A) Technician A only B) Technician B only C) Both Technicians A and B D) Neither Technician A nor B
What is the pointer of a dial thermometer attached to that causes it to move?
What will be an ideal response?
A hazard:
a. Does not need to be seen. b. Is any road condition or other road user that is possible danger. c. Can not turn into emergency.