The MOV instruction writes the value of the ____________________ (source, destination) word into the ____________________ (source, destination) word.
Fill in the blank(s) with the appropriate word(s).
source, destination
You might also like to view...
After prolonged use, the head of a chisel becomes flared out from striking with a steel hammer, thus the chisel becomes _____ or burred.
A. gourded B. mashed C. cupped D. mushroomed
What type of joint is formed between parts A and B?
Refer to Drawing Number 750098A on page 115 for the following questions.
Answer the following statement(s) true (T) or false (F)
1. The overload unit contacts are connected in parallel with the motor starter contactor unit control coil. 2. Electronic type of thermal overload units are adjustable for a range of motor load currents, and are set for the full load amperes (FLA) of the specific motor load. 3. When the melting alloy is a solid, the shaft of the ratchet wheel is held from turning. 4. When the bimetallic strip is heated, the metal with the lower thermal expansion characteristic will become longer, and cause the metal strip to bend.
Jones Elevator is paying $6.60 for #2 yellow corn. It has a 2.5 percent dockage for every percentage point over 15.5 percent (dry corn) moisture. You can dry it for $0.28 per bushel. You have 132,000 bushels of corn with 22.5 percent moisture. Shrinkage is figured by adjusting the weight of wet corn to dry corn. One bushel of dry corn weighs 56 pounds. Which is the better deal, drying it yourself or selling it and taking the dock, and by how much?
What will be an ideal response?