Technician A says to check tire radial runout to determine the cause of high speed vibration. Technician B says to check tire axial runout to determine the cause of high speed vibration. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
A
You might also like to view...
Which of the following describes a retroreflective scan?
a. The scanning method in which the light beam transmitted from the transmitter is reflected back to the receiver by the target to be detected b. The scanning method in which the target to be detected passes between the transmitter and receiver, interrupting the light beam c. The scanning method in which the receiver responds only to depolarized light reflected from a corner cube reflector or polarized sensitive tape d. The scanning method in which a target is detected as it passes between a photoelectric sensor and a reflector
After Napoleon’s defeat at Waterloo, which relative of the executed Louis XVI did the allies install as Louis XVIII of France?
a. his son b. his uncle c. his brother d. his nephew
Which computer component generates a steady stream of one-bit long voltage pulses?
A) Central processing unit B) Capacitor C) Volatile memory D) Clock generator
One complete set of plans _____
a. is made for all contractors to share b. is kept in the field office for reference c. must be on site at all times d. must be given to the building inspector