In an RC parallel circuit, the voltage across the resistor and the voltage across the capacitor are _____.
A. less than 90° out of phase with the resistor voltage lagging
B. in phase
C. less than 90° out of phase with the resistor voltage leading
D. 180° out of phase
Answer: B
You might also like to view...
As far as buildings are concerned, what is the Underwriters Laboratories (UL) primarily recognized for?
Use the figure below to answer the following questions.
All 125V, single-phase, 15A and 20A general-purpose receptacles mounted in an area of an agricultural equipotential plane are required to be of what type?
a. Twist load b. Arc fault c. Tamper resistant d. Ground fault circuit interrupter
A passive wheel speed sensor is also referred as ________
A) Hall-effect B) Variable reluctance (VR) C) Magneto-resistive (MR) D) Either A or B
A basic JFET has the following values: VDD = +6 V, RD = 1 k?, IDSS = 6 mA, and V(GS off) = -4 V. The input pulse varies between 0 V and -3 V. The high and low output voltages for the circuit are
A) 0 V, 6 V B) 0 V, 4 V C) 2 V, 4 V D) 4 V, 6 V