Explain why the sheathing of nonmetallic sheathed cable should extend into the device box or beyond the cable clamp approximately 1/4 inch.

What will be an ideal response?


To protect the conductors from sharp edges on the device box or the cable clamp.

Trades & Technology

You might also like to view...

When applying tape to seal staple punctures, you should _____.

a. apply a double layer of tape b. wrap tape around the staples c. first seal the punctures with mastic d. rub the tape firmly over the staples

Trades & Technology

Technician A says the flywheel and pressure plate assembly both rotate at engine crankshaft speed when the engine is running. Technician B says when the engine is running, and the transmission is in neutral, the transmission input shaft may be either rotating or at rest, depending on the clutch pedal position. Which technician is correct?

A) Technician A only B) Technician B only C) Both Technicians A and B D) Neither Technicians A nor B

Trades & Technology

Which terminal of the OBD-II data link connector is the signal ground for all vehicles?

A) 4 B) 1 C) 3 D) 5

Trades & Technology

There are five basic types of gates: the AND, OR, NOR, NAND, and ____.

A. NORAND B. FORWARD C. INVERTER D. XOR

Trades & Technology