If the transmission ratio is 1:1, the driveshaft speed is equal to engine speed
Indicate whether the statement is true or false
TRUE
You might also like to view...
The bottom mortar joint that is set on an arch form should be slightly angled inward because it must be cut out with a chisel to a depth of _____ after the arch form is removed and repointed.
A. 1" B. ¾" C. ½" D. ¼"
What have the courts stated, in cases such as Stees v. Leonard, about the liability for subsurface conditions for a contractor that both designed and built the home for the owner?
What will be an ideal response?
Which of these actions is taken to prevent over-pressurizing the torch hoses during equipment setup?
a. Opening the tank valve slowly. b. Turning the regulator adjusting screw counterclockwise (out). c. Turning the regulator adjusting screw clockwise (in). d. Installing flashback arrestors.
El componente etiquetado con el número 6 en la Figura 2 es un:
a. un sello de extremo. b. una conexión de energía. c. una conexión de empalme/T. d. un termostato.