Which of the following is NOT true?

A reaction A+B?C occurs in the liquid phase. A vessel contains a liquid at P = 1 MPa and T = 298.15 K. The vessel initially contains 10 moles of A and 10 moles of B, but the reaction is allowed to reach equilibrium at P = 1 MPa and T = 298.15 K. After the reaction reaches equilibrium, the pressure is reduced isothermally until it reaches 0.13 MPa, at which point the first bubble of vapor forms. The liquid at this point is 39 mol% A, 39 mol% B and 22 mol% C. The first bubble of vapor is 52 mol% A, 40 mol% B and 8 mol% C.


A. If the pressure is further decreased isothermally, the total number of moles of C in the vessel will decrease.
B. The vapor pressure of A at this temperature is about 0.173 MPa, assuming the liquid is an ideal solution.
C. The equilibrium constant of the liquid phase reaction is 1.88, if the liquid is an ideal solution.
D. The equilibrium constant for the reaction is 1.45, if the liquid is an ideal solution.
E. If the vapor pressure of C is above 50kPa at this temperature, then the activity coefficient of C must be below 1.

Trades & Technology

You might also like to view...

Balancing a hydronic system is best done by _____.

a. following a systematic procedure b. adjusting flows to obtain the design chiller-outlet water temperature c. adjusting flows to obtain maximum compressor-outlet pressure d. following a trial-and-error method to achieve proper cooler temperature differences

Trades & Technology

A total of 2 MJ are delivered to an automobile battery (assume 12 volts) giving it an additional charge. How much is that additional charge? Express your answer in ampere-hours.

What will be an ideal response?

Trades & Technology

When working on a refrigeration or air-conditioning system, along with tools and test equipment, the service technician, to avoid penalty, must have a ____________________ or ____________________ on the job site.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Which type of memory in a flash PIC allow programs (software) to be stored and overwritten via a PC?

A. RAM B. HD C. EPROM D. EEPROM E. ROM

Trades & Technology