ASE-Style Multiple Choice
A ____ is done to deposit enough paint on panel edges, corners, or near the ends of body panels.
A. blend coat
B. medium wet coat
C. banding coat
D. full wet coat
Answer: C
You might also like to view...
What is the total weight of 2 pieces of 1/2-inch bar stock as shown? One cubic inch of steel weighs 0.2835 lbs. Carry the answer to two decimal places.
The symbol shown in the above figure represents a _____.
a. tee
b. 45-degree ell
c. 90-degree ell
d. lateral
When necessary, auxiliary views can be found on a sheet other than where the viewing plane lines appear. The method for doing this is called cross-reference zoning and is used to indicate the location of a view back to the viewing location on a previous page. The auxiliary view is located on a different page and is labeled with the sheet number and zone of the cross-reference viewing plane.
Answer the following statement true (T) or false (F)
What happens when the 3-way valve shifts into the heat position?
A. The pilot solenoid valve is de-energized and the refrigerant pressure in the end cap is reduced to compressor suction pressure. B. The pilot solenoid valve is energized and the refrigerant pressure in the end cap is reduced to compressor suction pressure. C. The spool valve inside the 3-way valve shifts to seal the evaporator side. D. Superheated refrigerant is routed directly into the condenser.