A process control technician is performing maintenance within the restricted approach boundary. Which of the following is required in order to perform non-electrical work near energized components?

a. The worker must be equipped with PPE only.
b. PPE is required and the worker must be aware of the hazard.
c. The worker must be qualified, aware of the hazard, and wearing appropriate PPE.
d. PPE is not required for maintenance work.


c. The worker must be qualified, aware of the hazard, and wearing appropriate PPE.

Trades & Technology

You might also like to view...

? Identify and state the historical significance of the Wilderness Campaign.

What will be an ideal response?

Trades & Technology

____________________ is graded on the basis of the fineness of the fibers

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Technician A says that charging system testing requires that the battery be at least 75% charged. Technician B says that a digital multimeter can not be used to test charging system voltage. Who is right?

A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B

Trades & Technology

A forehand travel angle will result in:

A) Less penetration B) Higher travel speed C) Flatter weld profile D) All of the above

Trades & Technology