Technician A says that 6 point socket is more likely than a 12 point socket to round off a fastener head. Technician B says that a 12 point socket is more likely than a 6 point socket to round off a fastener head. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians
D) Neither technician
B) Technician B only
You might also like to view...
?Technician A says that installing a compression ring upside down can cause oil consumption. Technician B says that the top compression ring groove usually suffers more wear than the other ring grooves. Who is right?
A. ?Technician A only B. ?Technician B only C. ?Both A and B D. ?Neither A nor B
An acceptable charging circuit voltage on a 12 volt system is ________
A) 12.6 to 15.6 volts B) 12 to 14 volts C) 14.9 to 16.1 volts D) 13.5 to 15 volts
If the measured resistance of a diode is very low in both directions, the diode is probably ________
A) normal B) shorted C) open D) conducting heavily
Which of the following statements regarding steel structural connections is correct?
A. Most connections in a framed connection are riveted due to the superior strength of this connection method. B. Connection detail is a plan view of the connection with sections cut through it to show elevations of the connection. C. It is common practice to connect angles or any other connectors that are to be attached in the shop by bolting and then to make field connections by welding. D. A common connection method for joining beams to columns and beams to beams is a continuous beam connection.