Recompute the reactions for the frame in Figure P9.43 if support C settles 0.36 in. when the load acts and support A is constructed 0.24 in. above its intended position. Given: E = 30,000 kips/in. 2 and I = 60 in. 4 .
You might also like to view...
What component is used to control the actual rail pressure of a CR diesel fuel system?
A. rail pressure sensor B. rail pressure control valve C. EHI solenoid D. accumulator
All of the following statements are true EXCEPT:
A. when coil springs have sagged beyond specifications, they are replaced. B. a few vehicles use torsion bar springs that allow for spring height to be adjusted by tightening a screw against a bracket mounted on one of the torsion bar ends. C. shock mounts are designed to continually support a vehicle. D. air shocks or shock absorbers with coil springs around them are designed to be used only for temporary overload conditions.
Explain the recommended method of charging a system with a capillary tube system.
What will be an ideal response?
If you drop your textbook it falls because the earth pulls it downward. At the same time, your textbook pulls on the earth with a force that is
a. equal to the downward pull on the textbook and in the same direction. b. equal to the downward pull on the textbook but in the opposite direction. c. immeasurably small. d. zero.