One ____ is a flow rate of 1 coulomb/second.
a. watt
b. ohm
c. ampere
d. psi
c. ampere
You might also like to view...
Why do we now use lead-free (L-F) solder?
What will be an ideal response?
When disassembling a lattice boom, workers must _____.
a. stand inside the boom and drive the connector pins out with hammers b. stand outside the boom when removing connector pins c. stand underneath the boom and help support it during disassembly d. first remove connector pins between the boom pendant attachments and the boom hinge
La profundidad del peldaño (huella) se mide desde _____.
a. la cara de una contrahuella hasta el lado de la siguiente b. la cara de una contrahuella hasta la cara de la siguiente c. la parte superior de un peldaño hasta la parte inferior del siguiente d. el contrapiso hasta la parte superior del peldaño
In springs, the compression length ____.
A. is the maximum recommended design length for the spring when compressed B. is the actual length of the spring when compressed under extreme conditions C. is the theoretical length of the spring when compressed D. is the actual length achieved when the compositional portions of the material are accumulated E. none of the above