In ____ construction, the resistors, capacitors, and conductors are formed on the substrate using a screen printing process.
A. thick-film
B. thin-film
C. monolithic
D. hybrid
Answer: A
You might also like to view...
The figure below shows four waveforms labeled (a) to (d). Match the waveform to following signal type that is most likely:
a. Analog _____
b. Digital _____
c. Analog with noise______
d. Quantized analog ________
The evaporator fan for a split-system air conditioner is a ________
A) squirrel-cage fan B) shaded-pole fan C) blade fan
Which one of the following symbols cannot be used in a Logix tag name?
A) Pound sign (#), dollar sign ($), and asterisk (*) B) Upper or lower case letters C) Numbers D) Single underscores (_)
To avoid being injured by a catastrophic regulator failure, when cracking open the oxygen cylinder you should stand:
A) In front of the valve on the same side of the T handle. B) Directly in front of the T handle so you can turn it off quickly. C) Behind the valve by the T handle. D) Behind the valve on the opposite side of the T handle.