Full head joints should be formed on one ear (end edge) of the block to be laid.

Answer the following statement true (T) or false (F)


False

Trades & Technology

You might also like to view...

A benefit of using a partial view is:

A. Saving drawing time B. Conserving space that would be required to draw the complete object C. Permitting a larger scale view to show more detail D. All of the above are benefits of a partial view

Trades & Technology

Compute the vertical displacement of the hinge at C in Figure P7.25. Solve by the moment-area method. EI is constant.

Trades & Technology

To get the best reading, the sensor should be located where?

A) Where the leak is less likely to occur B) On the bottom of the tank C) Where the leak is more likely to occur D) On the top near the valve

Trades & Technology

When using GTAW on carbon steel pipe in the 1G-ROTATED position, run all passes at or near a point

_____. a. at the top of the pipe as it rotates b. at the bottom of the pipe as it rotates c. that is 45 degrees from the top of the pipe d. that is 90 degrees from the bottom of the pipe

Trades & Technology