Low carbon steel has a carbon content of ____.
A. .30% and less
B. .30% to .50%
C. .50% to .90%
D. .80% to 1.50%
Answer: A
You might also like to view...
_______________ are violations where, upon re-inspection, a substantially similar violation is found.
Fill in the blank(s) with the appropriate word(s).
2.7 รท 0.19 =
A) 14.22 B) 13.21 C) 13.22 D) 14.21
Answer the following statement(s) true (T) or false (F)
1. the noise from a defective rear drive pinion bearing may produce a high pitched whistling or whining sound that changes with driving mode (on or off the gas pedal) 2. In a differential with a gear ratio of 4:1, the drive pinion would revolve four times to cause the ring gear to rotate once. 3. the positive traction differential is designed to resist the tendency of one drive wheel to rotate without the other. 4. a non-hunting ring and pinion gear will have the same teeth on the pinion touch the same teeth on the ring gear each revolution. 5. Backlash is the amount of movement between the tooth contact of two gears in mesh.
Select which type of part the calendering process is used for.
A. sheet products B. plastic eyeglass lenses C. hollow plastic parts D. none of the above