The final overall gear ratio is calculated by ________
A) Multiplying the transmission ratio with the final drive ratio
B) Subtracting the final drive ratio by the transmission ratio
C) Adding the transmission ratio to the transfer case ratio
D) Adding the transmission ratio to the transfer case ratio then multiplying that number by the final drive ratio
A
You might also like to view...
During disassembly, some extension-to-case bolts were found to have aluminum strips in the threads. Technician A says the extension housing should be replaced. Technician B says to clean and repair the internal threads with a thread insert. Who is correct?
A. A only C. Both A and B B. B only D. Neither A nor B
The purpose of a capillary tube is to ____.
A. regulate the refrigerant flow into the evaporator B. lower the pressure of the liquid refrigerant C. lower the boiling point of the refrigerant D. all of the above
Explain how a traditional switch loop for a single-pole switch is wired using Type NM cable.
What will be an ideal response?
Which of the following motors provides constant speed from no-load conditions to full-load conditions?
a. Series DC b. Squirrel cage induction c. Synchronous d. Shunt DC