During salvage, what should be done with any pictures on the walls?
a. they should be left in place and turned toward the wall
b. they should be left in place and covered with plastic sheeting
c. they should be placed face-down under the bed
d. they should be removed and placed with the furniture
Answer: d. they should be removed and placed with the furniture
You might also like to view...
Referring to following figure, a medium-duty truck with an automatic transmission is reported to not crank. Which of these steps should be performed first to troubleshoot the cause?
A. Connect booster batteries and attempt to jump-start. B. Check for loose electrical connections. C. Verify the concern; attempt to crank the engine. D. Jumper the neutral start switch since they typically fail.
Following the manufacturer's spacing-to-mounting height ratio recommendations will assure which of the following?
A) Pleasant wall brightness. B) Relatively uniform illumination. C) Good visual comfort probability (VCP) D) Adequate average foot-candle levels on the task plane.
In the article “An Investigation of the 
-Fe Flux System Using the Submerged Are Welding Process on HSLA-100 and AISI-1018 Steels”, the carbon equivalent P of a weld metal is defined to be a linear combination of the weight percentages of carbon (C), manganese (Mn), copper (Cu), chromium (Cr), silicon (Si), nickel (Ni), molybdenum (Mo), vanadium (V), and boron (B). The carbon equivalent is given by
Means and standard deviations of the weight percents of these chemicals were estimated from measurements on 45 weld metals produced on HSLA-100 steel base metal. Assume the means and standard deviations (SD) are as given in the following table.
a. Find the mean carbon equivalent of weld metals produced from HSLA-100 steel base metal.
b. Assuming the weight percents to be independent, find the standard deviation of the carbon equivalent of weld metals produced from HSLA-100 steel base metal.
Ratites' low-fat, low-cholesterol, red meat is popular in _____.
Fill in the blank(s) with the appropriate word(s).