Four 90 degree bends are used in this gas tank. Find, in inches, the length of plate needed to build this tank.
ANS: 74 3/4
You might also like to view...
If Type AC is run through a hole in a framing member that has an edge closer than ____________________ inch(es) to the edge of the framing member, it must be protected by a metal plate at least 1/16-inch thick.
Fill in the blank(s) with the appropriate word(s).
What is the purpose of the venturi on a one pipe venturi system?
A) The venturi mixes the supply and return water for more even temperatures B) The venturi increases the pressure in the pipe to offset piping losses C) The venturi separates air bubbles from the circulating water D) The venturi creates a negative pressure at the main connection, drawing the necessary flow through the branch
Oil soaked rags:
A) Can be a health hazard B) Should be stored in an approved safety can C) A, B, and D D) Can be a fire hazard
When handling a horse stay out of _________ of the horse.
Fill in the blank(s) with the appropriate word(s).