Explain the difference between a clutch master cylinder and the slave cylinder in a hydraulic clutch system.
What will be an ideal response?
The clutch master cylinder performs the following functions: moves fluid through the hydraulic line to the slave cylinder, compensates for temperature change and minimal fluid loss to maintain the correct fluid volume through the use of a bleed port and compensation port, and compensates for a worn clutch disc and pressure plate by displacing fluid through the reservoir bleed port, thereby eliminating the need for periodic adjustment.
The slave cylinder disengages the clutch by extending the slave cylinder pushrod and makes sure the clutch release bearing is contacting the pressure plate through the use of the slave cylinder preload spring
You might also like to view...
For some plastics and composites, the internal stresses of production may be reduced or eliminated by____, which consists of prolonged heating of the plastics part at a temperature lower than the molding temperature.?
A. ?burnishing B. ?milling C. ?annealing D. ?flame polishing
There are ____ minutes in a degree.
A. 60 B. 120 C. 360 D. 600
An engineer with Calahan Technologies calculated the AW of cost values shown for a presently owned machine, using estimates she obtained from the vendor and company records.
 FIGURE 1.png)
Which of the following problems could occur if a humidifier is not regularly cleaned and checked for operation?
A) Excessive dryness B) Mold growth C) Nickel in the water supply D) CO poisoning