Which terminal is responsible for the compressor?
A) W terminal B) G terminal C) Y terminal D) O/B terminal
C
You might also like to view...
How is the refrigerant charge normally checked on air-conditioning systems that use a TEV expansion device?
A) Feel to see if the suction line is cold and the liquid line warm. B) Superheat C) Subcooling D) Adjust the charge to achieve a 40°F saturated evaporator temperature.
A goat classified as having a gummy mouth has better dental structure than a goat classed as broken mouthed.
Answer the following statement true (T) or false (F)
Which of the following statements refers to the divergent rule or signal flow?
A) Assume that brackets enclose the power supply that provides power to three other blocks in the diagram. If power is delivered to one of the system blocks, then the power supply is not the problem. B) If all block inputs are required to produce a valid output, then a valid output indicates that all input paths are fault-free. C) Test the midpoint block output between the brackets, depending on the test results one of the brackets moves to the middle. D) The sealing instruction is an example of this type signal flow.
Technician A says that clearcoat only adds gloss and shine to the finish, and that the protection is in the basecoat. Technician B says that clearcoat has ultraviolet (UV) protection in it. Who is correct?
A. Technician A only B. Technician B only C. Both Technicians A and B D. Neither Technician A nor B