Technician A says that panel painting is a technique used when the color is known to be a perfect match to the existing finish. Technician B says that when applying color using the panel painting technique, gun angles must be kept perpendicular to the panel, with the proper distance maintained at all times. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technicians A and B
D. Neither Technician A nor B
C. Both Technicians A and B
You might also like to view...
A factory has a sheet metal wall with a thermal conductivity of 105 Btu/h-ft-oF. The wall thickness is 1 inch. (a) If the inside temperature of the wall is 80.0oF and the outside temperature of the wall is 10.0°F, determine the heat transfer rate per unit area from conduction (the conductive heat flux) for the wall. (b) For an inside wall temperature of 80.0°F, plot the conductive heat flux through the wall for outside wall temperatures ranging from 90.0°F to 0.0°F. (c) For an outside wall temperature of 10.0°F, plot the conductive heat flux for inside wall temperatures ranging from 50.0°F to 85.0°F. Discuss how this relates to gaining cost savings by heating a building to a lower temperature in the winter.
Given: ? = 105 Btu/h-ft-°F; ?x = 1 in = 0.0833 ft What will be an ideal response?
Los perfiles "Z", ángulos, y perfiles tipo sombrero son algunas de las diferentes formas de _____.
a. subviguetas b. canales c. hierros angulares d. apoyos
Los dos tipos más comunes de dispositivos de protección contra sobrecorriente son:
a. calentadores y ventiladores. b. disyuntores y fusibles. c. fusibles de rosca y dispositivos con retardo de tiempo. d. conmutadores de seguridad y centros de carga.
If the operating frequency decreases in Figure 12-1, the inductance ________
A) decreases B) remains the same C) decreases to zero D) increases