What are the steps involved in installing a compression fitting?
What will be an ideal response?
To install a compression fitting:
1. First, slide the compression nut onto the tubing.
2. Next, slide a sleeve over the tubing.
3. Then, insert the tubing as far into the fitting as possible. Hold it in that position as you use a flarenut wrench to tighten the compression nut and another wrench to hold the fitting.
4. Finally, after both fittings have contacted the sleeve, tighten them 1-1/4 turns further to compress the sleeve into the tubing to form the seal.
You might also like to view...
A(n) ____________________ system uses water from the Earth and then, after the cycle is complete, returns the water to the Earth.
Fill in the blank(s) with the appropriate word(s).
Which bearing can handle greater loads?
A) Tapered roller B) Needle C) Ball D) All of these are correct.
The three basic applications of screw threads are __________, __________, and __________________
Fill in the blank(s) with correct word
Hard hats should be made of fiberglass or _____.