Dirt can affect all of these sensors, EXCEPT ________
A) Low frequency (older style) MAF B) High frequency (new style) MAF
C) Cold wire MAF (mass air flow sensor) D) Hot wire MAF (mass air flow sensor)
C
You might also like to view...
List three problems that the interior landscaper faces that are not common to the exterior landscaper
What will be an ideal response?
What is the resistance of a rectangular gold wire that is 0.5 cm long, 10 micrometers wide, and 2 micrometers in thickness? The resistivity of gold is 22 x 10-9 ohm-m.
What will be an ideal response?
What is the maximum contracting force of a hydraulic cylinder having a diameter of 4.00 inches and a ram diameter of 2.00 inches if the hydraulic pressure applied is 2,800 psi? Round to the nearest hundred pounds
What will be an ideal response?
After a root pass has been applied, any excess buildup or undercut should be removed by _____
a. increasing the amperage of the welder during the hot pass b. grinding the face of the root pass with the edge of a grinding disk c. grinding away narrow strips of material with a cutoff wheel d. carefully heating and cutting away the excess with a torch