What two important things should be done before pressing in a bushing?
A) Clean all the oil off the bushing and wash your hands so you won't get contaminated
B) Oil the bushing and start it in the bore with a hammer before you start pressing
C) Chamfer and lubricate the bore
D) None of the above
C
You might also like to view...
Refer to the figure above. The hand signal demonstrated means _____.
a. Emergency Stop b. Use auxiliary hoist (whipline) c. Travel/Tower travel d. Travel—Both Tracks (crawler crane)
Older vehicles had radiator tanks made of brass, soldered to a copper radiator core. If the fins of the core are in good condition, a restricted copper/brass radiator can be disassembled and ____________________ by a shop specializing in radiator repairs.
Fill in the blank(s) with the appropriate word(s).
The female part of the flower is called the _____
a. Anther c. filament b. Stamen d. pistil
Find the volume for each cylinder in a 0.055-inch thick head gasket with a bore of 4.250 inches . Round your answer to the nearest hundredth of a cubic inch
A) 0.78 in^3 B) 3.12 in^3 C) 2.89 in^3 D) 0.73 in^3