PROBLEM 2.9

A 9-kN tensile load will be applied to a 50-m length of steel wire with E = 200 GPa. Determine the smallest diameter wire that can be used, knowing that the normal stress must not exceed 150 MPa and that the increase in length of the wire must not exceed 25 mm.


Trades & Technology

You might also like to view...

What can be used to prevent the converter from sliding off its splines and falling as the transmission is being removed?

A) Tilt the transmission up at the rear B) Pack assembly lube into the splines C) Use a retaining bracket D) Keep the torque converter attached to the flexplate

Trades & Technology

If an atom loses an electron, it becomes a __________

Fill in the blnuk(s) with the apprpriat word (s).

Trades & Technology

SAE standards J2099 specifies that the maximum level of non-condensable gases in recycled R-134a should not exceed:

A) 0.5% by volume B) 1.0% by volume C) 1.5% by volume D) 2.0% by volume

Trades & Technology

Schematic diagrams are also known as line diagrams and ____________________ diagrams.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology