All of the following statements about rotor refinishing are true EXCEPT:
A. for cuts greater than 0.015 inch, take two or more shallow cuts rather than one deep cut.
B. the first cut should only be a portion of the total anticipated depth of cut.
C. the finishing cut removes more metal than the rough cut.
D. areas not touched by the cutting bits will be darker than those that have been touched.
Answer: C
You might also like to view...
If the input frequency of a half-wave rectifier is 60Hz, what will be the output frequency?
Fill in the blank(s) with the appropriate word(s).
What is the maximum distance between pitot tube measuring points in rectangular ducts?
a. 6 inches b. 10 inches c. 12 inches d. 24 inches
Site dimensions are usually stated in ____.
A. whole inches B. tenths or hundredths of feet C. feet and inches D. meters
What must the technician do before checking an air conditioning system for refrigerant leaks using a black light?
A) Evacuate the system B) Overcharge the system by 10 oz. C) Turn the system off and allow the pressure to equalize D) Install dye in the system