Fuel pumps are equipped with _____________ at the inlet to prevent particulate matter from entering the pump.
Fill in the blank(s) with the appropriate word(s).
screens
You might also like to view...
Final adjustment of a deck slab's elevation is done using _____.
a. hanger clamps b. wedges c. haunches d. leveling screws
An insulated centrifugal separator is to be used to separate the liquid and vapor portions of a saturated mixture flow. A saturated mixture of water with a quality of 0.30 and a temperature of 120oC enters the system with a mass flow rate of 4.50 kg/s. Saturated liquid water exits through one exhaust pipe at a temperature of 120oC at a rate of 3.00 kg/s, and 1.50 kg/s of saturated water vapor exit at 120oC through the other exhaust pipe. (a) Determine the amount of power that was added to the system to generate these outlet flows. (b) Using your separation chamber model, plot the power required to produce flows of saturated vapor at 120oC ranging from 1.40 kg/s to 4.0 kg/s.
State 1: Inlet stream; State 2: Saturated liquid exit stream; State 3: Saturated vapor exit. Given: T1 = T2 = T3 = 120oC; x1 = 0.30; x2 = 0.0; x3 = 0.0; m?1=4.50kgs; m?2=3.00kgs; m?3=1.50kgs Assume: Q?=0 (insulated). Given no other information regarding the mixing chamber, make the following common assumptions: ?KE=?PE=0. We are told there is power. Also, assume the mixing chamber is a single-inlet, multiple-outlet, steady-state, steady-flow device. What will be an ideal response?
A simple hydrocarbon with the formula CnH2n+2 is a(n) _______________
Fill in the blank(s) with the appropriate word(s).Solve this proportion.
Fill in the blank(s) with the appropriate word(s).