How often should a renewable media, pleated surface be changed?
What will be an ideal response?
Once or twice a year.
You might also like to view...
The electromagnet is a magnet produced through ____________________.
Fill in the blank(s) with the appropriate word(s).
All of the following statements are true EXCEPT:
A. a clutch replacement usually includes a new disc, release bearing, clutch cover, pilot bearing or bushing, and sometimes a flywheel and/or front transmission seal. B. asbestos fibers cannot pass through a regular vacuum bag. C. clutch parts are balanced at the factory while on the engine. D. always disconnect the battery ground cable before removing a transmission or transaxle.
What is the recommended procedure when preparing an EG and distilled water coolant for installation into an engine?
A. pour distilled water in radiator first followed by EG concentrate B. pour EG in radiator first followed by distilled water C. alternate EG and distilled water into radiator one quart at a time D. mix EG and distilled water outside the radiator: pour into radiator as a mixture
Why are copper fittings cleaned before soldering or brazing?
A) To create enough clearance so that the pipe will fit into the fitting B) To enhance the aesthetic appearance of the completed joint C) To make it easier to see the junction between the fitting and the pipe D) To remove oxides