The tool in this figure is being used to:
A. Compress a control arm bushing
B. Compress a coil spring
C. Compress a shock absorber
D. Compress a jounce bumper
Answer: B
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. A primary winding is a winding that is connected to a load. 2. Autotransformers can be used as step-up or step-down transformers. 3. Autotransformers cannot use multiple taps to provide different voltages. 4. The values of voltage and current for autotransformers can be determined by using standard transformer formulas. 5. In a Variac, the windings are wrapped around a tape-wound toroid core inside a plastic case.
Which of the two methods of prestressing (pretensioning or posttensining) yields a precast, prestressed concrete member?
What will be an ideal response?
All of the following statements are true EXCEPT:
A. a standard differential allows one wheel to rotate if it begins to slip. B. a limited slip differential locks the spider gears when one wheel starts to lose traction. C. if there are 10 teeth on the pinion gear and 33 teeth on the ring gear, the ratio is 5.30:1. D. when torque is applied to the clutch pack, the side gear locks to the case, causing the wheel on that side to be driven.
Because consumers who purchase bison generally want low-fat red meat, bison raised for this market are fed:
A. hay B. grain C. commercial feed D. grass