What type of component actually stores the acquired data in a simple sample and hold circuit?
A) capacitor B) shift register C) flip-flop D) resistor
A
You might also like to view...
Two technicians are discussing the marcel portion of a clutch disc. Technician A says that the lining is riveted to the marcel at one side of each wavy portion. Technician B says that the lining is bonded solidly to the marcel. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
_____________ braid hoses are used for petroleum base hydraulic and fuel oils at low pressures.
Fill in the blank(s) with the appropriate word(s).
A diagnostic trouble code (DTC) has been set for a fault with the lateral acceleration sensor or circuit. What test could be performed to check if the sensor is working?
A) Disconnect the sensor and hold it sideways to see if the scan tool reads 0.0 G B) Unplug it and see if the scan tool reads 1.0 G C) Disconnect the sensor and hold it sideways to see if the scan tool reads 1.0 G D) Drive the vehicle in a circle to see if the scan tool reads 0.0 G
When measuring resistance, a reading of OL on the DMM indicates ________
A) Continuity of the circuit B) An open circuit C) A defective meter probe D) None of these