When creating different room arrangements using the same pieces, why is it helpful to create copies of the room before creating the scenes?
What will be an ideal response?
Having a copy of the room is useful for establishing move points. In other words, when you have to move pieces from one room to another, clicking similar move points in both rooms ensures that the room contents end up in the right place. A copy of a room can be erased once it's not needed.
You might also like to view...
A wall assembly (total area = 100 ft2) consists of 80 ft2 of opaque wall with an R-value of R-20 and a 20 ft2 of window whose R-value is R-2. The effective (overall) R-value of the entire wall assembly is approximately
A) R-3. B) R-11. C) R-7. D) R-15. E) none of the above.
Some alternators are cooled by engine coolant
A) True B) False
A typical IAT or ECT sensor reads about 3000 ohms when tested using a DMM. This resistance represents a temperature of about ________
A) 284°F (140°C) B) 70°F (20°C) C) 120°F (50°C) D) -40°F (-40°C)
If you are troubleshooting a reach-in cooler because its compressor is not running, you should ________
A) test the door heaters because an open in a heater will keep voltage from reaching the compressor B) test the door switches to ensure that voltage is reaching the compressor C) test the supply voltage, compressor relay, and thermostat to see that voltage is passing through these components and reaching the compressor