When inverting on its side, you can better predict how the load will behave as the weight shifts from the floor to the hoist by _____.

a. practicing with a lighter load first
b. monitoring the location of the CG
c. using a ratchet hoist instead of block and tackle
d. using a load line of the smallest size allowable


b. monitoring the location of the CG

Trades & Technology

You might also like to view...

The most difficult type of door to fit to a cabinet is a(n) _____ door.

a. lipped b. flush c. oversized d. overlay

Trades & Technology

Why do some supermarkets use split condensers on their parallel rack systems?

a. To make sure there is plenty of condenser available for hot weather. b. To reduce refrigerant required by using only half the condenser in cold ambients. c. To reduce the weight of the condenser on the building roof support beams.

Trades & Technology

Which of the following could cause this condition?

A reach-in with cap tube has the following conditions: ? Subcooling is 10° ? Superheat is 25° a. Dirty or iced evaporator b. Restricted cap tube c. Overcharge d. Undercharge

Trades & Technology

Two technicians are discussing runout. Technician A says that runout won't affect vehicle operation. Technician B says that runout can cause severe vibration. Who is correct?

A. A only B. B only C. Both A and B D. Neither A nor B

Trades & Technology